Used Benchtop Plastic Injection Molding Machines

All our used machines come with a 30 day limited warranty *

Occasionally, we come across a machine that is in very good condition and really requires nothing more than a good thorough checkup and perhaps some minor repair. Once we've determined that the machine has no issues we may list it here or save it for an upgrade rebuild . If you have questions or don't see what you are looking for, contact us as we may have something that isn't listed. Our email and phone number can be found at the bottom of any page or use our Contact Us page to drop us a note.


??? IN THE MARKET FOR A USED MACHINE ???

!!! CONSIDER USING OUR BENCHTOP MOLDING MACHINE EVALUATION SERVICE !!!

Have you found a machine somewhere but aren't certain of it's true value, condition or if it is the right machine for your needs? Then our evaluation service might be just the ticket. This very low cost service can save you a lot of time and money and help make sure a machine you are considering is not broken, missing important parts or simply inadequate for your needs. We will provide a written report on every machine you want to consider and email it to you including an estimated value based on our years of experience with benchtop molding machines. Click here for more details about this service as well as how you can possibly even get it for FREE. !!!


Currently Available Used Inventory

Powerlab 2/3 oz

Manual Injection

This is a very nice lightly used Powerlab machine. It has a 2/3 oz shot size. Works off standard 110-120VAC household power. Works best with PS, PE, and PP plastics.

Machine comes with 30 day limited warranty**. Operating instructions may be purchased seperately.

Contact us by phone or email with any questions regarding this or any of our use, new or rebuilt machines.

Price $ 900.00 (plus shipping)


~~~ SORRY THIS MACHINE HAS BEEN SOLD ~~~

Iasco Tesco / Crystal Alloy / 66-M

Manual Injection

This is a nice, lightweight, lightly used injection molding machine made by Crystal Alloy (sold new thru Iasco Tesco at $1,294.00).

Works off standard 120VAC and shoots about 2/3 ounce and is best for smaller parts using PS, PE, PP plastics. We have gone over this machine and all issues have been resolved and it is ready to begin making your parts. This is a perfect starter machine !!!

Parts shown were actual parts shot with this machine during testing. Machine comes with operating instructions and free technical support.

Contact us by phone or email with any questions regarding this or any of our new or rebuilt machines.

Price $ 894.00 (plus shipping)


~~~ SORRY THIS MACHINE HAS BEEN SOLD ~~~





Morgan Industries / G-100T

Air Powered Clamp and Inject

This is a very nice G-100T that we have gone through and repaired all issues and fully tested the machine. No need to wonder if you are getting a machine that has hidden problems that the seller (even if honest) knows nothing about. These machines can power up and look normal to the untrained eye, but have hidden problems that only someone familiar with them can find. Let our expertise ensure you that you are getting a solid machine that is ready for work...

This particular model sells new for around $22,000.00 from Morgan Industries and has little to no changes in its design over many years. These machines hold their value very well (once they are close to fully depreciated like this one) and if taken care of, can be used and later resold for very little to no loss in value. This machine has the rugged and very easy to use Watlow 808 digital controllers for the barrel and nozzle temperature. Just push and hold the knob and turn it to the desired setpiont. Then let go and it will display the current temperature. This machine comes with the 30 day limited warranty*, instruction manual and free technical support.

Contact us by phone or email with any questions regarding this or any of our new or rebuilt machines.

Machine Specs:

6 cu. in. (4 oz.) max. single shot 20 ton max. clamping force (toggle).

12,000 psi max. injection pressure

Works off standard 120VAC and 160 psi air max.

Price $ 6,995.00 (plus shipping)

~~~ SORRY THIS MACHINE HAS BEEN SOLD ~~~

*Limited 30 Day Warranty: Manning Innovations (seller) warrants to the original purchaser (buyer) of any of our used machines that they shall be free from defects in materials and workmanship for a period of 30 days from the date of purchase. This warranty does not apply to damage due to misuse, abuse, negligence, accidents, repairs, modifications, wear and tear or the lack of proper maintenance. Machines must be returned to Manning Innovations with shipping cost prepaid and properly packaged to prevent damage (damage due to improper shipping is not covered under this warranty and will not be the responsibility of Manning Innovations and may void any rights to this warranty by the buyer). Documents showing proof and date of purchase as well as a description of the the defect must accompany the machine. Buyer must contact the seller in writing (email) to obtain a return authorization before returning any machine or part thereof. Once received, if we verify the defect falls within the scope of our warranty, we shall repair the machine (or part) and return at our (seller's) expense. However, if we determine that the claim is invalid, return shipping will be at the buyer's expense. In the event that we cannot readily repair or replace the machine, we may elect to return the original purchase price of the machine less any shipping charges incurred by the buyer at the time of sale or any time thereafter. Manning Innovations shall in no event be held liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of any of our machines or products. This warranty gives the buyer specific legal rights and my not express other rights the buyer may have which may vary among locations. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES (EXPRESSED OR IMPLIED) INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.